Dry-Slat™ Waterproof Oak Slat Wall Panels – Bathroom, Kitchen & Feature Walls

Panel size: 2700mm (height) x 168mm (width)
Panels per pack: 3
Coverage per pack: 1.36m?
Adhesive required: 1 tube of Innest Panel Glue per pack

How many packs do I need?

Use the coverage calculator on this page ? enter the height and width of your wall and it will tell you how many packs to order.

If you'd rather work it out yourself, multiply the height and width of your wall in metres to get the area, divide that figure by 1.36 and round up to the next whole pack.

? Small cloakroom feature wall, 2.4m x 1m (2.4m?) ? 2 packs
? Standard bathroom wall, 2.4m x 2m (4.8m?) ? 4 packs
? Full-height feature wall, 2.7m x 3m (8.1m?) ? 6 packs

Panels are supplied at 2700mm and can be trimmed to height with a fine-tooth saw, so standard ceiling heights are covered without joining. If your wall is wider than a whole number of packs, order one extra ? offcuts are useful for making up the final run and for fitting around windows, sockets and sanitary ware.

Most slat wall panels are made from MDF. Put them in an Irish bathroom ? where steam, damp and a wet winter are simply facts of life ? and within a year the edges swell, the panels lift away from the wall, and the timber holds onto that musty smell for good.

Dry-Slat? Oak is built for exactly the rooms other slat panels can't survive.

Fully waterproof throughout, these panels won't warp, won't absorb moisture and won't retain odours. That makes them suitable for bathrooms, en-suites, shower rooms, wet rooms, kitchens, utility rooms and any other high-humidity space in the house. A warm, natural oak woodgrain finish gives you the look of real timber, while a smooth, sealed surface wipes clean in seconds with a damp cloth ? no sealing, no oiling, no annual maintenance.

Oak is the most versatile finish in the range. It brings warmth to small, cold rooms, softens hard tiles and sanitaryware, and works just as well behind a freestanding bath as it does in a downstairs cloakroom. Paired with brushed brass or matt black fittings, it produces the calm, hotel-bathroom look that's driving so much of Irish and Northern Irish interior design right now.

Specification

? Sold in packs of 3 panels
? Each panel measures 2700mm x 168mm
? Total coverage 1.36m? per pack
? Fully waterproof ? suitable for bathrooms, shower rooms and wet areas
? Wipe-clean surface, no sealing required
? Won't warp, swell or retain odours

Installation

Dry-Slat? panels fix directly to the wall using Innest Panel Glue. Allow one tube of adhesive per pack (available in Accessories). Panels can be trimmed to height with a fine-tooth saw, and because there are no grout lines, there's nothing to reseal and nowhere for mould to take hold. Most single walls are finished in an afternoon.

Delivery across Northern Ireland and Ireland

We deliver waterproof slat panels throughout Northern Ireland and the Republic of Ireland, including Belfast, Derry, Dublin, Cork and Galway. Not sure about the colour? Order a sample pack and see the finish in your own light before you commit.