More and more bathrooms in Northern Ireland are being finished with shower wall panels instead of tiles. They go up faster, there is no grout to clean or crack, and a whole bathroom can often be done in a day. We are Innest, a family business in Dungannon, Co. Tyrone, and wall panels are what we sell. This guide covers what people ask us most.
What are shower wall panels?
Shower wall panels are large, waterproof boards that cover a wall in one piece instead of hundreds of small tiles. Ours come in two ranges:
- Rapid Stone™: stone and marble effect panels, 2440 x 600mm, made from a solid 8mm stone-based board. One panel covers a full-height bathroom wall with no joins.
- Rapid Tile™: tile effect panels, 1200 x 600mm, with the look of stacked glazed tiles in Bottle Green, Sage Green, Navy Blue and Ivory White, without the grout. The new 4mm SPC colours are on pre-order, dispatching late February 2027.
How much do shower wall panels cost?
- Rapid Stone™: £41 per m² (£60 per 2440 x 600mm panel, minimum 2 panels).
- Rapid Tile™: £75 per pack of 2 panels (1.44m²), about £52 per m².
- Trims in satin black, matt silver or brushed brass: from £15 (3000mm lengths for Rapid Stone™, 1200mm lengths for the 4mm Rapid Tile™ colours).
- Panel adhesive: £10 (we recommend 1 per pack).
A typical shower enclosure needs four to six Rapid Stone panels, so the panels for a full shower area often cost less than tiles, adhesive, grout and a tiler's labour.
Panels or tiles?
- Speed: panels go straight onto the wall with adhesive. No setting time, no grouting.
- Cleaning: no grout lines to go black or grow mould. A wipe is enough.
- Mess: Rapid Stone™ can be fitted over old, sound tiles, so there is no need to strip the wall back.
- Look: large stone and marble panels give a slab look that is hard and expensive to get with real stone.
Can you fit them yourself?
Many of our customers fit the panels themselves, and plenty use a local fitter or joiner. The panels are glued to a flat, sound wall, and the edges and corners are finished with our Rapid Stone/Tile trims. All joints, including the joins between panels, are sealed with a sanitary silicone.
Please note: the panels themselves are fully waterproof, but they are one part of your shower wall, not a complete waterproofing system. Any tanking or waterproofing of the walls before fitting is the job of the customer or installer.
Delivery in Northern Ireland
Rapid Stone™ panels are in stock at our base in Dungannon, Co. Tyrone, and the new Rapid Tile™ colours are on pre-order. Delivery anywhere in Northern Ireland is £35, and free on orders over £475. You can also collect from us. That means Belfast, Derry~Londonderry, Newry, Enniskillen, Armagh, Omagh, Ballymena, Lisburn and everywhere in between.
Outside Northern Ireland? We also deliver Rapid Tile™ to England, Scotland and Wales, and across the Republic of Ireland. See our UK and Ireland guide to tile effect shower panels.
See the colours first
Order free samples of up to three colours. You only pay the small postage charge. It is the best way to see the finish in your own bathroom light.
Common questions
Are the panels suitable inside a shower?
Yes, Rapid Stone™ and Rapid Tile™ are made for showers, baths and wet areas when fitted with the right trims and silicone.
Do I need to remove my old tiles?
Not usually. If the tiles are firmly stuck and the wall is flat, Rapid Stone™ can go straight over them. Remove any loose or hollow tiles first.
Do you supply trade customers?
Yes. See our trade page or get in touch.


